Karcher RA 2050 User Manual - page 26
26 | EN
5.
Press the
Play/Pause button to start the playback of your sequence.
6.
To stop playback, press the Stop button. To delete your sequence press this button a second
time.
ID3-Tags
When the files on the inserted disc are equipped with ID3-Tags (artist, track and album names) you
can display them by repeatedly pressing the Disp button.
USB
Playing MP3 files from USB
1.
Switch the unit on and select the USB mode by pressing the Source button repeatedly.
2.
Insert a USB stick into the USB port on the unit.
3.
The USB is being read and the total number of albums and tracks will then be shown in the
display.
4.
Playback starts automatically with the first track.
5.
To temporarily stop the playback (pause), press the
Play/Pause button once. Press the button
again to resume playback.
6.
To stop playback, press the Stop button.
Playback modes
Skipping, fast forwarding and fast rewinding tracks, repeat modes and random function as well as ID3
tag display in USB mode are the same as for MP3-CD playback. Please see the previous chapter for
the instructions.
Charging Function
You can charge a mobile phone or similar device through the unit’s USB port by simply connecting the
device to the USB port.
Notes:
•
A USB device must always be connected directly to the USB port of this product. The use of a
USB extension cord is not supported by this product. The USB port of this product cannot com-
municate with a computer directly.
•
The reading time for a USB drive varies depending on the speed of the memory device and the
number of songs and folders. In some cases the reading time may be as long as 60 seconds.
•
Always switch off the unit before removing a USB flash drive to prevent damage to your USB
device. The manufacturer is not responsible for the loss or damage of data.
•
Due to numerous methods of compression it could be that some files or USB flash drives cannot
be played.
AUX Input
You can connect the audio output of an external device such as an MP3 player to this unit to listen to
the sound of that device through the amplifier of this music system.
1.
To connect the external device please use a standard stereo audio cable (3.5 mm to 3.5 mm
plugs) (not included) to connect the headphone out or audio line out of the external device to the
AUX input socket of this unit.
2.
Turn on the unit and select AUX mode by pressing the Source button.
3.
Switch the external device (e.g. MP3 player) on.
4.
Start playback of the external device and adjust the volume control of the main unit to the desired
level.
5.
Remember to switch off the unit when you are finished using the external device.