Karmann Colorado Operating Instructions Manual - Accessories

Carrier rails Bicycle rack

ACCESSORIES

8-1

left repeater lights. Fold the lights into the

bumper and fix them with the knurled screws. 

The cable and plug of the repeaters are

secured behind the bumper with a strap

when not in use. 

Roof rack*

Carrier rails for a load carrying system are let

into the roof of your Karmann mobile home. 

For assembly purposes, the fixing points of

the rack are simply inserted into the round

slots in the rails and pushed into the

desired position.

Then the fixing screws are tightened.

Note

Please note that the maximum load for the

roof is max. 150 kg.

*Special equipment

Cycle racks*

The bicycle rack is mounted on the

extendible bumper with the help of four

safety bolts A. In order to open the function

flap at the rear of the vehicle, remove the

safety bolts on the vehicle and hinge the rack

backwards. 

The bumper is locked in both extended and

retracted positions by means of securing pins

B. The illustration shows the securing pin

when loosened. In order to lock the bumper,

turn the pin handle by 180 degrees. The pin

must lock into the recesses in the bumper. 

Before pushing in the bumper, loosen the

knurled screws which secure the right and

A

A

B

Do not fold back the carrier when

loaded. 

Check that the securing pins are

clicked into place each time you

extend and retract the bumper. 

The repeater light plug has to be

disconnected when the bumper is

retracted.

Caution