Kauoheng KH-313 SERIES Operation Manual - 1. Points to Observe
1. Points to observe
○
1
Installation Environmental Conditions
Please install the machine as below instructions in order to use this
machine in the best condition for a long period of time.
Do not install the machine at a place subject to
direct sunshine and/or adjacent to a heat
generation source such as a furnace/oven.
Do not install the machine at a place subject to
rapid temperature changes.
The temperature should be 0℃~ 35℃ inside the
controller.
Do not install the machine at a place where there
is a lot of dust and dirt, or a location affected by
chemical gases, sea breeze etc.
Do not install the machine at a place subject to
excessive moisture.
The humidity should be 30 % ~ 80 %
Do not install the machine on a slope or unstable
place.
Please connect the electric power and make sure
the ground wire is connected correctly.