Kauoheng KH-313 SERIES Operation Manual - 1-4

3.3 Yarn feeder 

  The position of carrier is adjusted according to the desired knitting 

width, correctly make yarn feeder beside the end working needle by 

10 ㎜.The yarn feeder must be in the central position between front 

and rear needles, also check its height refer to Fig.3.3.When work 

several yarn feeder in knitting, the position of carrier should be 

adjusted to make each yarn feeder not be overlapped, it avoids 

damage of the parts.The yarn carrier on rail must be adjusted in easy 

moving, adjustment refers to Fig.3.4. 

   Fig.3.3 Position of yarn carrier

Kauo Heng

高亨

精機

  Loosen two screws to adjust up & down 

     Fig.3.4 Adjustment of carrier 

1-4