KBL megaSun space 2000 Operating Instructions Manual - page 31
O p e r a t i n g I n s t r u c t i o n s | megaSun space 2000
31
Starts the Aroma test (1 cycle).
㊿
AROMA
07/07
Aroma start testcycle
> Start: press `+` for 2s
Not available in this system.
AIR CONDITIONING
01/02
Aircon (air conditioning)
Specifies the “start speed” setting of the body fan
at the beginning of the tanning.
Factory setting: 2
>
> 1 .. . 9
AIR CONDITIONING
02/02
Start level body fan
Not available in this system.
Note:
For devices with LED technology, the desired RGB
color mode is adjusted by the colorMotion control-
ler.
>
RGB
01/01
RGB mode
EASYCARE 01/03
SETTINGS
> press ENTER
Not available in this system.
UV-LEVEL 01/01
SET UV-LEVEL
>
These settings must only be made by trained
service personnel!
Loads the factory (default) settings.
SERVICE
01/10
Load factory defaults
> Reset: press `-` for 2s
SERVICE
02/10
PERSONAL PIN
> press ENTER
Submenu call
with START/ENTER.
PERSONAL PIN activate / deactivate
Enter your personal PIN.
SERVICE\PERSONAL PIN
01/01
ENTER SOLARIUM PERSONAL PIN
> PIN:
SUBMENU
Submenu call with START/ENTER. Displays the
current firmware typ / variant.
SERVICE
03/10
FIRMWARE-TYP
> press enter