KBL megaSun space 2000 Operating Instructions Manual - General Safety Advice
O p e r a t i n g I n s t r u c t i o n s | megaSun space 2000
7
General safety advice
• Follow all instructions given in this manual. In
addition, observe all relevant statutory provisions
and regulations, also those applicable in the
country of operation.
• The unit must only be installed and assembled by
specifically trained staff.
• Arbitrary modifications or conversions of the
equipment are not permissible.
• Observe all danger signs and safety notices
attached to the equipment.
• Safety notices must not be removed, and safety
equipment must not be disabled or removed.
• The unit must only be operated when in perfect
working condition.
• Never operate the unit with the outer covers or
acrylic panes removed.
• The tanning system must be controlled via a
timer that complies with the generally applicable
standards.
• Absolutely observe the maintenance frequencies
indicated in the maintenance plan.
Tanning times
Adhering to tanning times and schedules is essential.
Updating the system software
ATTENTION
Risk of damage by switching off the
power supply voltage.
Disconnecting power supply during the up-
date process, will lead to damage of electronic
components.
•
Make sure that the unit is not disconnected from
the power supply voltage during the update.
To accomplish the update download the “USB-Con-
nect” software offered by KBL. For detailed informa-
tion press the help-button in the main menu.