KEDDY SK1000 Installation Instructions Manual - page 10
Lighting a fire
(If the chimney is cold or if there are unfavour-
able weather conditions, you may need to keep
the door ajar during the first five minutes in or-
der to establish a satisfactory chimney draught.)
-
Note! The reason why we want to achieve the
optimum operating temperature in the insert
quickly is that it works most efficiently at this
temperature. This minimises the emissions and
maximises the heat generation.
SK1000/2000 are equipped with an innovative
system for closing the door. When you put in
firewood or take out ashes from the fireplace put
the door gently in an 100-110 degree opening
angle and the door will stay open. Give the door
a gentle push back by the 100 degree angle and
the door will automaticly close and lock itself in a
secure position.
NOTE! For further information on firing in our
fireplace insert, see the film "firing tips" on
keddy.se.
CARE & FIRING INSTRUCTIONS Cont...
GOOD TO KNOW
Since it can take some time for a cold chimney to
-
-
-
In addition
-
-
REMOVAL OF SOOT AND MAINTENANCE
Soot must be removed at least once per season. The
soot from the chimney and the connections should
-
in a sheet metal container. Pay attention to the risk
of fire when you throw out the ash, as the ash
may contain live embers for a very long time!
door and the supply air control must be closed. If
the chimney must be inspected and approved by a
- 10 -