KEDDY SK1000 Installation Instructions Manual - Installation Guide Alt. 2
Other manuals for SK1000:
Instalation Instructions
of
12
- 8 -
INSTALLATION GUIDE ALT. 2
1. Make a hole in the existing lintel in such a way that
you can insert the pipe and insulation. (approximately
300 x 300 mm)
2. Fix the smoke outlet pipe to the insert and adjust
the insert to be level with the adjustable feet.
where you want to insulate it against the existing
chimney with mineral wool. Ensure that the insulation
seals tightly against the existing chimney and that it
is level with the upper edge of the pipe so no "soot
pockets" can be created to the side of the pipe.
3. Then follow the previous instructions from point 6
to point 8. Finish by sealing the wall, or alternatively