KeepGuard CAM User Manual - page 12
22
23
The camera can send MMS message through GSM network, so
before using this function, you need to open GSM/GPRS service
from your service provider. It supports four bands 850MHz,
900MHz, 1800MHz and 1900MHz.
To set any parameters,always start with the power switch in the
SETUP Position. After the LCD screen comes on,press the
MENU
key.
1.Press
RIGHT or LEFT until reach the GPRS Setting menu item.
2.Press
UP or DOWN to select Work mode.Press OK to enter into
submenu.
3.Press
UP or DOWN to select ON.
4.Press
OK to save this setting and reach Send Set item.You can
set these items according to the concrete requirement.
Attenion:Please don’t select Select GPRS Send as ON if you
want camera to sends MMS message via GSM network.
5. Press
RIGHT or LEFT until return to the “GPRS Setting” menu.
6. Press
UP and DOWN to select the Net setting. Press OK to enter
into the
Net Set Mode.Press UP and DOWN to select between Auto
Setting and Manual Setting. Press
OK to enter into the Net setting
menu.
7.Press
UP or DOWN to select Auto Setting or Manual Setting.(If the
operator’s information is not included in the camera, you must
select Manual Setting and set the parameters for the
URL, APN, IP
and
Port according to the settings the service provider makes
available,Please contact the network service provider if you are
not familiar with the settings.).
9.Press
RIGHT or LEFT until return to the GPRS Setting menu.
10.Press
UP or DOWN to select Send to.
11.Press
OK to enter into submenu.
12.Press
UP or DOWN to select Phone No.
13.Press
OK to enter into Phone NO input
screen.You can input 5 phone numbers. Use
the remote control to key your phone number.
Press or
* to switch between digits, letters
and punctuations.Press number buttons to
key in the digits. Press “←” to delete.
14.Press
OK to set the current setting and
return to the Send to menu.Press
MENU to exit.
15.Press
UP or DOWN to select Email address.
16.Press
OK to enter into the Email address input screen.
17.After input the Email address,press
OK to save all of these
settings and finish the Quick Start MMS Setting.
The camera sends image through GPRS network with SMTP
protocol to a Email address. Use this way the communication cost
will be much cheaper in many countries.
To set any parameters,always start with the power switch in the
SETUP Position. After the LCD screen comes on,press the
MENU
key.
Quick Start GPRS Setting
Quick Start MMS Setting