KeepGuard CAM User Manual - page 16
On,Off
On,
Off
Set Video Sound
Selcte "
on" to recorder audio along with the Video
when camera is set to video when the camera is set
to video mode(saved file sizes will be slightly larger).
Password Set
Default
Cancel,
Execute
Select ″
Execute″ and press OK to restore all
parameters to the original factory default settings. If the
camera is behaving oddly and you think you may have
changed the setting for something accidently (but
aren′t sure which one), this will reset all parameters to
their most commonly used or “generic〞settings.
30
Allows the user to input latitude and
longfitude coordinates for the camera’s
location.This data will be embedded in the
files saved on the camera’s SD cards,(If
ON
is selected). This makes it possible to see
each camera’s Location as a “pushpin”on
Google Earth maps reviewing a folder full of
photos from multiple cameras or use other
“geotag” capable software(Picassa,etc.)
Coodinate
Input
On,
Off
The SETUP Menu-Parameters and Settings List w/Descriptions
Deletes (erases) all files stored on a card to
prepare it for reuse. Always format a card that
has been previously used in other devices.
Caution! Make sure you have downloaded
and backed up any files you want to
preserve first! Press OK to execute (then
select Yes and press
OK again on color viewer
models), press
MENU (or select NO then
press
OK) to exit without formatting.
Format
Execute
(following by
an addtional
NO)
Selects video standard /format for the″TV
Out″output jack.The video standard is NTSC
for the United States,Canada, Mexico, Asia
and South America. PAL is used primarily in
Europe.
NTSC, PAL
TV Out
Press
OK and use the UP/DOWN keys(to change
the setting) and
LEFT/RIGHT keys ( to move to the
next ield) to set the hour (24-hr format only,
″00″=midnight,″12″=noo and minute, and then (on
the lower row), the year, month and date.
Set Clock
Set
Turns Timed Scan recording mode
on/off.
When activated, Timed Scan forces the camera to
take photos or videos even when it is not triggered
by a nearby live animal, useful for constant
monitoring of an area that might be far away from
the camera. The user can set the start and stop
times for an independent block of Timed Scan
recording, as well as the interval time between each
photo/video.
Set Timed Scan
The SETUP Menu-Parameters and Settings List w/Descriptions
31
For safety purposes, enter a password each
time when entering into
SETUP mode.
You could choose
OFF to stop this function.