Kelvinator KSE26CRB User Manual - page 5
Kelvinator Air Conditioning
using the remote control 9
8 using the remote control
Kelvinator Air Conditioning
Timer operation
1 CLOCK/TIMER button
Press the CLOCK/TIMER button, the current timer
setting is displayed alongside either the TIMER ON
or TIMER OFF indicator, and will flash.
2 TEMP/TIME button
Press to set the desired time.
Forward
Backward
Each time you push the button, the time moves forward
or backward by 10 minutes depending on which
direction you press. The time alters as quickly as you
press the button.
3 After setting the timer for TIMER ON and TIMER OFF,
check the TIMER indicator on the display panel of the
indoor unit is illuminated.
4 Cancel button (CANCEL)
Press the CANCEL button to cancel the timer setting.
Preform steps 1, 2 and 3 to change the settings.
caution
When you select the timer operation, the remote control
automatically transmits the timer signal to the indoor unit
at the specified time. Therefore, keep the remote control in
a location from which it can transmit the signal to the indoor
unit properly. The effective operation time set by remote
control is limited in 24 hours.
MODE
❄
1
2
3
4
Examples of timer settings
Start
Off
6:00
Timer On
The TIMER ON feature is useful when you want the unit
to turn on automatically before you return home. The air
conditioner will automatically start operating at the set time.
ON/OFF button
Push this button again to stop the air conditioner.
Note: The fan speed cannot be adjusted when the unit is in
AUTO and DRY mode.
MODE
❄
1
2
3
4
• The DRY Mode will automatically select the drying
operation based on the difference between the set
temperature and the actual room temperature.
• The temperature is regulated while dehumidifying by
repeated turning on and off the cooling operation or fan
only. The fan speed indicator will display AUTO and low
speed will be used.
Eco operation
When you push the ECO button on the remote control
during cooling, heating (not applicable for cooling only
models), or AUTO operation , the air conditioner will
automatically increase (cooling) or decrease (heating) 1
degree per hour for the first two hours, then hold steady for
the next 5 hours, after that the unit will stop operation. The
fan speed will be automatically controlled. This feature can
maintain the most comfortable temperature and save more
energy for you.
Cooling/Heating/Fan only operation
Start
Ensure unit is plugged and power is available.
The OPERATION lamp on the display panel of the indoor unit
starts flashing.
1 Mode select button (MODE) Press to select COOL,
HEAT (not applicable for cooling only models),
or FAN ONLY.
2 TEMP/TIME button
Set the desired temperature, the most comfortable
temperature is between 21
O
C/70
O
F to 28
O
C/84
O
F.
3 Fan speed button
Press to select "AUTO" "LOW", "MED" and "HIGH"
4 ON/OFF button
When the remote control is off, push this button to start
the air conditioner.
Stop
ON/OFF button
Push this button again to stop the air conditioner.
The FAN ONLY mode does not control temperature.
Therefore, perform only steps 1,3, and 4 to select this mode.
MODE
❄
1
2
3
4
Drying operation
Start
Ensure unit is plugged and power is available.
The OPERATION indicator on the display panel of the indoor
unit starts flashing.
1 Mode select button (MODE)
Press to select DRY.
2 TEMP/TIME button
Push the "TEMP/TIME" button to set the desired
temperature.
3 ON/OFF button
Stop
When the remote control is off, push this button to start the
air conditioner.
Automatic operation
When you set the air conditioner in AUTO mode, it will
automatically select cooling, heating (not applicable for
cooling only models), or fan only operation depending
on what temperature you have selected and the room
temperature.
Once you select the operating mode, the operating
conditions are saved in the unit's microcomputer memory.
Thereafter, the air conditioner will start operating under
the same conditions when you simply push the ON/OFF
button of the remote control.
Start
Ensure the unit is plugged and power is available.
The OPERATION indicator on the display panel of the
indoor unit starts flashing.
1 Mode select button (MODE)
Press to select AUTO.
2 TEMP/TIME button
Set the desired temperature. Normally,
set it between 21
O
C/70
O
F to 28
O
C/84
O
F.
3 ON/OFF button
When the remote control is off, push this button to start
the air conditioner.
Stop
ON/OFF button
Push this button again to stop the air conditioner.
If the AUTO mode is uncomfortable, you can select the
desired conditions manually.
When you select the AUTO mode, you do not have to set the
fan speed. The fan speed will be automatically controlled.
MODE
❄
1
2
3
4
1
2
3
4
5
6
7
8
9
10
8
11
AUTO
MODE
❄