Kuschall KSL Service Manual - Service Manual
10
© Küschall AG, Switzerland | 2011-12
Service Manual
Back
Replacing push handles with Light cover
Difficulty:
Tools:
Ã
3, 4 Ò2 8
Remove bolts on both sides.
Push the cover down a little to expose the bolt . Remove bolts on
both sides.
Remove mudguard or clothes guard.
Pull out push handle and replace with new one.
Insert and tighten bolt on both sides.
Fit cover to both push handles using bolt .
i
If a push handle is not going to be fitted, a new Light cover that is
sealed at the top can be used.
Replacing push handles with adjustable backrest
Difficulty:
Tools:
Ã
3,4 8 Ò2
Remove backrest cover .
Remove bolts and end band .
Push the backrest band down a little to expose the bolt . Remove
nut and bolt on both sides.
Pull the push handles from the backrest tubes.
Slip the end band over the new push handles.
Fit the push handles in the desired position using the bolts . Secure
the end band to the push handles again using the bolts .
à 4 Nm
à 7 Nm
à 4 Nm
à 7 Nm
1
2
6
2
5
4
3
1