Kuschall KSL Service Manual - Service Manual
12
© Küschall AG, Switzerland | 2011-12
Service Manual
Footrests
Footrests
Three types of footrest are available: A footrest in aluminium or titanium
and a footrest with an adjustable footplate.
i
The titanium footrest requires a different sleeve in order to secure it
in the frame.
Replacing the footrest
Difficulty:
Tools:
Ã
4 8
Remove bolts on both sides.
Pull out footrest and replace with new one.
Insert the bolts through the frame and into the nearest holes at the
same height on both sides and tighten them.
Adjusting the height of the footrest
Difficulty:
Tools:
Ã
4 8
The footrest can be adjusted in 10 mm steps.
Remove bolts on both sides.
Move the footrest to the required height.
Insert the bolts through the frame and into the nearest holes at the
same height on both sides and tighten them.
.
Adjusting the angle of the footrest
Difficulty:
Tools:
Ã
3 10
For option angle adjustable only.
Undo the four bolts so that the footplate can be moved.
Move the footplate to the required angle and tighten the bolted
connections again.
i
The bolts must be tightened very securely to prevent the footplate
from moving.
à 7 Nm
à 7 Nm
à 13 Nm
1
2
1
1