KV2 Audio K-PAK2600 User Manual - Con
Con
ten
ts
K-RIG S
eries
K-RIG S
eries
O
ver
vie
w
Overview
2
Introductions
The amplifier compliment inside the KPAK2600 Amplifier is configured as:
Warranty
Service
Thank you for purchasing this KV2 Audio - K-RIG system, consisting of the KPAK2600 controller/amplifier
unit, KT2.0 Mid/Hi speakers and one or two KT2.15 subwoofers per side of the stereo system. The
K-RIG system has been developed as a high output, easy to use system, where a competitive price is
important. The K-RIG system has purposely been designed to be used as a ground stack, accordingly the
KT2.0 cannot be used separately without the KT2.15 and K-RIG must be assembled as described in the
enclosed user guide part “Using the system”.
Similar to our popular ES range, the K-RIG cabinets are fully active - driven by a proprietary amplifier,
which delivers equalized, and time aligned accurate signal to each of the components. One KT2.0 mid
hi enclosure and up to two KT2.15 subwoofers can be driven by a single KPAK2600 Amplifier, which
houses all signal processing and amplification, as well as providing signal outputs for external additional
subwoofer cabinets if required.
Please take some time to read this manual, to familiarize yourself with the advanced features of this
system.
High Frequency - 200-watt, Class AB, Push pull, Low intermodulation design
Mid Frequency - 500-watt, Class AB, High efficiency, Switch mode, Low intermodulation design
Low Frequency - 1600-watt, High-efficiency, Current-enhancing switch mode with Linear Active Filter
In most cases it would be advisable to use a KV2 Audio Line driver, (LD4) in addition between the mixer
outputs and KPAK2600 Amplifier, to ensure that the line to the amplifier is driven correctly and the
signal integrity maintained. Although this system is simple to operate, improper use can be dangerous.
This is a very high-powered device that can put out high voltages and sizeable currents. Always use safe
operating techniques with the K-RIG system.
FOR YOUR SAFETY, READ THE IMPORTANT PRECAUTIONS SECTION AS WELL AS THE INPUT, OUTPUT AND
POWER CONNECTION SECTIONS OF THIS MANUAL.
Your K-RIG System is warrantied against defects in material and workmanship. Please refer to your
supplier for more warranty details.
WARNING! Electronic components, risk of SHOCK!
In the unlikely event that your product requires service, it must be returned to an authorized KV2 Audio
distributor, service centre or shipped directly to the factory. All warranty and service repairs must be
undertaken by qualified technical personnel. If the unit/s needs to be shipped back to the factory, we
advise using the original packing to reduce the risk of damage in transit. Please contact your nearest
KV2 Audio centre for service details. Distributors list can be found at www.kv2audio.com.