KV2 Audio K-PAK2600 User Manual - Etting Star
G
etting star
ted
KP
AK2600
KP
AK2600
Features
6
Fea
tur
es
Input set
Master set
System status
Upper panel
1) Main input
This is the main system balanced signal input connector.
5) Hi Level
This is the level control for the Hi frequency driver output from -6dB to +3dB; it is ‘post’ the Master Level
control.
7) Attack / Extension
This switch turns on the low frequency enhancement circuitry (EXTENSION position) which boosts
frequencies around 60Hz to enhance the lowest frequency band.
8) Power ON / Bass limit
This is a dual color LED, when green it indicates that the AC power is on. When red it indicates that the
audio bass amplifier limiter has been activated.
9) Signal preset / Mid - Hi limit
This is a dual color LED, green indicates when audio signal is present at the KPAK2600’s input. When red
it indicates that the audio mid-hi amplifier limiter has been activated.
10) Thermal (auto reset)
When red it indicates that the thermal limit of the KPAK2600 has been exceeded and the unit has shut
down because of this.
6) Bass Level
This is the level control for the Hi frequency driver output from -6dB to +3dB; it is ‘post’ the Master Level
control.
3) Level
Adjusts the output level from -6dB to +6dB. This is the master level control for the system and will act on
both the KT2.0 and the subwoofer output for the KT2.15.
4) Harmonics
This level knob serves as a harmonic expander, and adds harmonics to the original sound. This control
serves to optimize performance of poor quality recordings, audio sources and devices. The Harmonics
knob creates more high frequencies from the mid frequencies and ‘lights up‘ the sound, giving an
impression of space and improved intelligibility.
2) Through signal out
Through Signal Output’ connector associated in parallel with Main input for sending unprocessed signal
to other devices, such as more KPAK2600’s to power more KPAK2600’s in a system.