KV2 Audio K-PAK2600 User Manual - Oduc
In
tr
oduc
tion
KP
AK2600
KP
AK2600
O
ver
vie
w
Overview
4
KVV 987 323 - KPAK 115V
KVV 987 317 - KPAK 230V
KVV 987 324 - KPAK 250V
Applications
Unpacking
Mounting
Features
The K-RIG Ground stack carton should
contain:
• Specifically designed as the amplification
and control elements for the K-PAK
loudspeaker systems
• Portable PA
• Dance clubs
• Reproduced music
Unpack the KPAK2600 and check to see if there is
any damage to it. If you find any damage notify
your supplier immediately. Only the consignee
may institute a claim with the carrier for any
damage incurred during shipping. Be sure to save
the carton and all packaging materials for the
carrier’s inspection. Should you ever need to ship
the unit, only use the original factory packing. If
the shipping carton is unavailable, contact your
supplier to obtain a replacement.
For additional reliability, the amplifier unit is
mounted on a suspension system that isolates
it from the shocks and impacts typically
encountered on the road. For installations, use
the EPAK2500 Wall mounting kit KVV 987 024.
• 3-way, 2300W Control and Amplification
system for use specifically with KT2.0 and
KT2.15 speaker cabinets
• High Frequency, 200W, Class AB, push-pull, low
intermodulation amplifier with transformer
balanced outputs
• Mid frequency, 500W, Class AB, high efficiency,
switch mode, low intermodulation design
amplifier
• Subwoofer, 1600W, high efficiency, current
enhancing, switching amplifier
• Complete, on board speaker management
system including equalization, time
alignment, crossover filters, amplifier
overdrive protection, harmonics
• and output level controls
• AC soft start circuitry with ON/OFF AC breaker
switch provides thorough power protection
• Passive heat dissipation design with demand-
sensitive forced cooling back-up system
• Professional enclosure using exterior-grade
Baltic birch with wear resistant polymer
coating
• Removable front cover provides storage of all
AC and speaker cables
• Bass Character- Attack or extension switch
alters the low frequency character
• Includes all speaker cables for a single stack
K-RIG system
• KPAK2600 Amplifier unit
• KT2.0 – Ground stack Active-Driven Mid-Hi
module
• KT2.15 – Ground stack Active-Driven Bass
module
• PowerCon detachable power cable
• Speakon cable 4.15 - 1,5m 4pin Speakon cable
• Speakon cable 4.40 - 4m 4pin Speakon cable
for KT2.15
• Speakon cable 8.60 - 6m 8pin Speakon cable
for KT2.0