Wireless 868 mhz weather station instructions manual introduction: congratulations on purchasing this weather station with wireless 868 mhz transmission of outdoor temperature and display of indoor temperature and humidity, weather forecast icons and weather tendency indicators. It is further featur...
The weather station battery cover hanging hole detachable stand lcd display function keys features: weather station • dcf-77 radio controlled time with manual setting options • time reception on/off • 12/24 hour display • hour and minute display, seconds indicated by flashing dot • time zone option ...
• weather forecasting with 3 weather icons and weather tendency indicator • weather forecasting icon sensitivity setting • temperature display in degrees celsius (°c) or fahrenheit (°f) selectable • indoor and outdoor temperature display with min/max recording • indoor humidity reading displayed as ...
Setting up: when one transmitter is used 1. First, insert the batteries in the transmitter (see “how to install and replace batteries in the temperature transmitter” below ). 2. Within 2 minutes of powering up the transmitter, insert the batteries in the temperature station (see “how to install and ...
The batteries are in place, all segments of the lcd will light up briefly and a short signal tine will sound . Following the indoor temperature/humidity and the time as 0:00 will be displayed. If these information are not displayed on the lcd after 60 seconds, remove the batteries from both units an...
Important: transmission problems will arise if the setting for additional sensors is not followed as described above. Should transmission problems occur, it is necessary to remove the batteries from all units and start again the set-up from step 1. How to install and replace batteries in the weather...
The weather station in the first three minutes of power being supplied to it. Battery change: it is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of these units. Please participate in the preservation of the environment. Return used batteries to an a...
Note: the time/date information is only available for min/max temperature data, and will be changed to default time after the reset operation • change lcd contrast, time zone, time reception on/off, 12/24 hour display, hour, year, month, day, °c/°f and weather forecasting icon sensitivity units in s...
Lcd screen dcf tower icon (for time reception) weather tendency icon date weather forecast icon indoor relative humidity % comfort indicator icon outdoor reception signal* indoor temperature in °c or °f outdoor temperature in °c or °f month outdoor transmitter identification number low battery indic...
Dcf-77 radio controlled time the time base for the radio-controlled time is a cesium atomic clock operated by the physikalisch technische bundesanstalt braunschweig which has a time deviation of less than one second in one million years. The time is coded and transmitted from mainflingen near frankf...
Manual settings the following manual settings can be changed when pressing the set key for: • lcd contrast setting • time zone setting • time reception on/off setting • 12/24-hour setting • manual time setting • calendar setting • snooze setting • °c/°f setting • weather forecasting icon sensitivity...
The time zone default of the weather station is 0. To change to another time zone: 1. Press the set key after completing the lcd contrast setting in order to enter the time zone setting (flashing). 2. Using the in key, set the time zone. The range runs from 0 to +12 and then runs from -12 back to 0 ...
12/24 hour time display setting flashing 1. After setting time reception on/off, press the set key, “12h” or “24h” flashes in the lcd. 2. Press the in key to select the “12h” or “24h” display mode. 3. Press the set again to confirm and to enter the “manual time setting” or exit the setting mode by p...
Flash. If reception has been unsuccessful, then the dcf tower icon will not appear but reception will still be attempted the following day. Calendar setting: year (flashing) date (flashing) month (flashing) the date default of the weather station is 1. 1. Of the year 2006. Once the radio-controlled ...
The default temperature reading is set to °c (degree celsius). To select °f (degree fahrenheit): 1. The “°c” will be flashing, use the in key to toggle between “°c” and “°f”. 2. Once the desired temperature unit has been chosen, confirm with the set key and enter the “weather forecast icon sensitivi...
For every sudden or significant change in the air pressure, the weather icons will update accordingly to represent the change in weather. If the icons do not change, then it means either the air pressure has not changed or the change has been too slow for the weather station to register. However, if...
The weather tendency indicator working together with the weather icons are the weather tendency indicators (located on the left and right hand side of the weather icons). When the indicator points upwards, it means that the air-pressure is increasing and the weather is expected to improve, but when ...
The comfort level indicators comfortable: a happy face icon “ ☺” indicating a temperature level between 20.0°c and 25.9°c (68°f to 78.6°f) and humidity between 45% and 65%. Uncomfortable: a sad face icon “ ” indicating any value outside the comfortable range. Toggling and resetting the indoor record...
Toggling and resetting the outdoor recordings: 1. To toggle between the outdoor current, minimum and maximum temperature data and the times at which they were recorded, press the out key: once to show the minimum temperature value with time and date recorded twice to show the maximum temperature val...
Low battery indicator low battery indicator is displayed on the lcd when the batteries require changing. Temperature transmitter the outdoor temperature is measured and transmitted every 4 seconds. The range of the temperature transmitter may be affected by the temperature. At cold temperatures the ...
Positioning the weather station the weather station comes attached with a removable table stand, which provides the option of table standing or wall mounting the unit. Before wall mounting, please check that the outdoor temperature can be received from the desired locations. To wall mount: 1. Fix a ...
Note: before permanently fixing the transmitter wall base, place all units in the desired locations to check that the outdoor temperature and humidity readings are receivable. In event that the signal is not received, relocate the transmitter(s) or move them slightly as this may help the signal rece...
Specifications: temperature measuring range indoor : -9.9ºc to +59.9ºc with 0.1°c resolution 14.2ºf to 139.8ºf with 0.2ºf resolution (“of.L” displayed if outside this range) outdoor : -39.9ºc to +59.9ºc with 0.1°c resolution -39.8ºf to +139.8ºf with 0.2ºf resolution (“of.L” displayed if outside this...
• please contact your local or/and regional authorities to retrieve the addresses of legal dumping grounds with selective collection • all electronic instruments must from now on be recycled. User shall take an active part in the reuse, recycling and recovery of the electrical and electronic waste. ...
