1. DL manuals
  2. La Crosse Technology
  3. Weather Station
  4. Wireless Weather Station
  5. Instruction Manual

La Crosse Technology Wireless Weather Station Instruction Manual

Summary of Wireless Weather Station

  • Page 1

    18 foldable stands lcd display function keys weather station instruction manual introduction: congratulations on purchasing this state-of-the-art weather station as an example of innovative design and quality piece of engineering. Providing radio controlled time, date, calendar, moon phase, indoor a...

  • Page 2

    19 • weather forecasting with weather tendency indicator • indoor comfort indicator • temperature display in ºc/ºf • indoor and outdoor temperature display with min/max records and time of reception • humidity data display as rh% • indoor and outdoor humidity display with min/max records • relative ...

  • Page 3

    20 following the setting up procedures. This is due to a random security code assigned by the transmitter at start-up. This code must be received and stored by the weather station in the first 3 minutes of power being supplied to the transmitter. Battery change: it is recommended to replace the batt...

  • Page 4

    21 7. Insert the batteries in the third transmitter as soon as the "channel 2" icon and outdoor data are displayed on the weather station. Then within 2 minutes, the channel 3 outdoor data from the third transmitter will be displayed and the channel icon will shift back to "1" once the third transmi...

  • Page 5

    22 in key out/+ key alm/date key set key snooze/ch key snooze/ch key function keys: weather station: the weather station has 6 easy to use function keys: set key • press and hold the key to enter manual setting modes: lcd contrast, time zone, time reception on/off, 12/24 hour display, manual time se...

  • Page 6

    23 lcd screen the lcd screen is split into 4 sections displaying the information for time/calendar/alarm/moon phase, indoor data, weather forecast and outdoor data. * when the signal is successfully received by the weather station, the outdoor transmission icon will be switched on. (if not successfu...

  • Page 7

    24 the lcd contrast can be set within 8 levels, from lcd 0 to lcd7 (default setting is lcd 4): 1. Press and hold the set key until the digit starts flashing. 2. Use the out/+ key to view all levels of contrast. 3. Select the desired lcd contrast. Confirm with the set key and enter in the time zone s...

  • Page 8

    25 1. The hour digit will start flashing. 2. Use the out/+ key to set the hour. 3. Press again the set key to set the minutes. The minute digits start flashing. 4. Use the out/+ key to set the minutes. 5. Confirm with the set key and enter the calendar setting. Note: the unit will still try and rece...

  • Page 9

    26 note: units of weather icon sensitivity and air pressure history are not affected. They are always expressed in hpa. Relative air pressure value setting the default relative pressure value is 1013 hpa (29.92 inhg). This can be manually set to another value within the range of 960 – 1040 hpa (28.3...

  • Page 10

    27 4. Confirm with snooze/ch key and exit the alarm setting. The icon ((●)) will be displayed along with the set alarm time. Note: if the calendar is displayed in the weather station, the alarm is not active. To view and active the alarm, press the alm/date key. The alarm icon and the alarm time wil...

  • Page 11

    28 forecast forecast forecast twice to show the min indoor temperature and humidity data with the recorded time and date. Three times to return to the current displayed values 2. Once the min or max data is displayed, press and hold the set key for 3 seconds to reset the respective min or max record...

  • Page 12

    29 note: once the weather tendency indicator has registered a change in air pressure, it will remain permanently visualized on the lcd. Air pressure history (electronic barometer with barometric pressure trend) the third section of the lcd also shows the relative air pressure value and the air press...

  • Page 13

    30 2. Use out/+ key to view the min/max temperature and humidity data for the selected transmitter. 3. To reset the minimum and maximum temperature and humidity data, and the times at which they were recorded, press the set key continuously for about 3 seconds. This will reset the min/max data recor...

  • Page 14

    31 foldout table stands: the foldout table stands legs are located on the backside. Simply unfold the stands on the back. Once the foldout table stands are extended, place the weather station in an appropriate location. Positioning the thermo-hygro transmitter the thermo-hygro transmitter is supplie...

  • Page 15

    32 outdoor humidity range : 1% to 99% with 1% resolution (display “- -“ if outside temperature is of.L; display 1% if 99%) interior data checking intervals indoor temperature : every 15 seconds humidity : every 20 seconds air pressure checking interval : every 15 seconds outdoor temperature and humi...