Summary of DK900EAJ01AA
Page 1
Dk900eaj01aa(ab) owner’s manual.
Page 2: Index
1 2012/3/8ver1.4+ver1.1 pre installation tips………………... ……………………………………………………………02 selecting where your bike goes………………………………………………………………. .02 important safety instruction……………………………………………………………………...03 specifications ……………….…….……………………………………………………………..05 assembly parts ………………………………………………………...
Page 3
2 2012/3/8ver1.4+ver1.1 the following are tips to aid you in the installation of the 900e fitness bike: 1. Prepare all relevant parts before starting, this will save you time! 2. About all screws of the unit, turn rightward is to fasten and turn leftward is to unscrew. 3. All tools needed for comple...
Page 4: Danger
3 2012/3/8ver1.4+ver1.1 when using this product, basic precautions should always be followed, including the following: please read the instruction carefully before starting to use this product. Danger – to reduce the risk of electric shock： always unplug this product from the electrical outlet immed...
Page 5
4 2012/3/8ver1.4+ver1.1 9. Keep the cord away from hot surfaces or ground. 10. Never operate the product with the air vents blocked. Keep the air vents free of lint, hair, etc. 11. Never drop or insert any objects into any vent of the treadmill. 12. Do not use or operate outdoors. 13. Place the trea...
Page 6
5 2012/3/8ver1.4+ver1.1 note: charge your battery once per week watt 表 rpm level 50 60 l5 58 67 l10 120 138 l15 193 221 l20 328 382 max. User weight 400lbs/180kg size of machine 2225mm x 698mm x 1525 mm packing weight of machine 141kg net weight of machine 128kg power supply 15v/2a dc (charger) spec...
Page 7
6 2012/3/8ver1.4+ver1.1 item description qty item description qty a frame 1 e end rocker post cover a 2 b handrail set 2 f end rocker post cover b 2 c rocker decoration cover a 2 optional parts d rocker decoration cover b 2 g chest belt pulse emitter polar t41 1 assembly parts.
Page 8
7 2012/3/8ver1.4+ver1.1 item description q’ty item description q’ty k01 truss philips screw m5xp0.8x15 12 k07 flat washer Ø10xØ20x2.0t 2 k02 truss philips screw m6xp1.0x15 4 k08 nylon nut m10xp1.5 2 k03 cks hex screw m10xp1.5x20 4 k09 cks hex screw m10xp1.5x15 8 k04 spring washer m10 14 k10 lug wren...
Page 9
8 2012/3/8ver1.4+ver1.1 assembly procedures connect frame (a) and tighten with (k03), (k04) and (k05) ps: don’t press the wire. Fix left and right handrail (b) to and tighten with (k04) and (k19). Then fasten rocker decoration cover(c, d) with (k01). Tighten the pedal tube with (k04),(k06),(k07),(k0...
Page 10: Operation Instruction
9 2012/3/8ver1.4+ver1.1 operation instruction i. Console specifications this led console can indicate level, rpm, distance, watt, speed (kmh/mlh), time, calories, heart rate and heart rate bar. Program profile will be shown on dot matrix. 1. All the buttons are of touch ones and have passed esd 15kv...
Page 11
10 2012/3/8ver1.4+ver1.1 2-3. When there is more than 25 rpm or user press any key on console, the console will be lit and return to start/ready status. Iii. Key functions 1. Quick start：when you press quick start key, the electronic watch will run in mannul mode and accumulate each functional value...
Page 12
11 2012/3/8ver1.4+ver1.1 『 wat』 for 1 second first, then will display the values for 10 seconds. After that it will display 『level』 、 『 kmh』 、 『 time』 and 『cal』 for 1 second and then display the values for 10 seconds. 1-2-2. Imperial system『mlh』 ： it will display『level』 、 『 rpm』 、 『 dist』 and 『 wat』...
Page 13
12 2012/3/8ver1.4+ver1.1 2-5. When program is in progress, you can change the workout level by touching level▲、level▼. There are totally 20 level. 2-6. When program stops or during the program, press stop key, dot matrix will automatically display the previous profile. Scrolling text will show each ...
Page 14
13 2012/3/8ver1.4+ver1.1 3-3. Weight settings: scrolling text will show『enter weight kg』 (or display『enter weight lbs』). You can select the value of weight on the number keys 0~9. The dot matrix will flash preset value 30. Meanwhile the input values will flash also. You change the value by the numbe...
Page 15
14 2012/3/8ver1.4+ver1.1 4. Test mode：fitness test mode 4-1. Under start/ready status, press test and the dot matrix will display『male test』or『girl test』, the scrolling text will display『press the arrows to select gender』and『press enter to begin profile』. Setting of age: press enter to set the age. ...
Page 16
15 2012/3/8ver1.4+ver1.1 4-4. During program, the scrolling text will display: 4-4-1. Metric system『kmh』： it will display『level』 、 『 rpm』 、 『 dist』 and『wat』for 1 seconds first, then it will display the values for 10 seconds. After that, it will display 『 level』、『kmh』、『time』 and『cal』for 1 second, the...
Page 17
16 2012/3/8ver1.4+ver1.1 at this time the dot matrix will flash the preset value “30”, the scrolling text will display 『enter age』. You can set the value of your age by the number keys 0~9. When the value you set is less than 10, the dot matrix will display value of age 10. When the value you insert...
Page 18
17 2012/3/8ver1.4+ver1.1 the scrolling text『average speed =』, then『mlh= 0.0』 the scrolling text『calories burnt =』, then『kcal= 0.0』 the scrolling text『average watts =』, then『watts= 0.0』 the scrolling text『average mets =』, then『mets= 0.0』 5-9. Introduction of hr control mode: pre-set the heart rate co...
Page 19
18 2012/3/8ver1.4+ver1.1 - 60 > minutos』(range:10 ~ 60). The dot matrix will display the preset value 『 10』 and it will be blinking. When you press 0-9 to set values, you should set 2 digits (range: from 10 to 60). After setting values, press enter to confirm and start the program. 6-4. After time s...
Page 20
19 2012/3/8ver1.4+ver1.1 display『rpm ↓』. 6-8.3. During exercise, when level has reached 20 and watt cannot achieve the target value, dot matrix will display『rpm↑』. 6-8.4. After starting program, the console will judge the value of watt once every 10 seconds. During the exercise, the program will com...
Page 21
20 2012/3/8ver1.4+ver1.1 7-5-1. Time goal: the dot matrix will display the preset value of time,10 min. The scrolling text will display 『enter time minutes』(range:10 ~ 60). You can insert the exercise time by the number keys 0~9. After setting, press enter to start the program. 7-5-2. Distance goal:...
Page 22
21 2012/3/8ver1.4+ver1.1 the scrolling text『distance covered =』, then『ml= 0.0』 the scrolling text『average speed =』, then『mlh= 0.0』 the scrolling text『calories burnt =』, then『kcal= 0.0』 the scrolling text『average watts =』, then『watts= 0.0』 the scrolling text『average mets =』, then『mets= 0.0』 v. Engine...
Page 23
22 2012/3/8ver1.4+ver1.1 you can press “enter” to enter the service mode. 2-2. To test the signal of prm: the led of computer will display『testing rpm 0』. To test the value of rpm to be detected by machine itself. 2-3. To test the signal of level: the led of computer will display『testing level 0』. Y...
Page 24
23 2012/3/8ver1.4+ver1.1 vi. Profile pictures: 1. P 1 picture: program 1 profile progra m 2 profile program 3 profile.
Page 25
24 2012/3/8ver1.4+ver1.1 2. P 2 picture: interval 1 program： interval 2 program： interval 3 program：.
Page 26
25 2012/3/8ver1.4+ver1.1 2. Test picture: fitness test： test-male test-female 4. Hrc picture: hrc： 5. Watt picture: watt control：.