LA Fitness DK900EAJ01AA Owner's Manual - Operation Instruction
9
2012/3/8Ver1.4+Ver1.1
Operation Instruction
I. Console Specifications
This LED console can indicate LEVEL, RPM, DISTANCE, WATT, SPEED (KMH/MLH),
TIME, CALORIES, HEART RATE and heart rate bar. Program profile will be shown on Dot
Matrix.
1. All the buttons are of touch ones and have passed ESD 15KV(contact/air) testing.
2. There are 7 languages for selection, such as English, Spanish, French, Italian, German, Dutch
and Portuguese.
3. There are 20 levels of resistance. The maximum WATT value is 400W under 60RPM.
4. Fan
4.1. The fan is preliminarily set in “OFF” mode. Press ON/OFF Key to turn on the fan and
keep it running in a low speed. When pressing Low Key or High Key, the fan will run in
a low or high speed. Press ON/OFF to cut off the power supply to stop the fan. When in
PAUSE Mode, it is under pause status and the resistance will be automatically adjusted
to the minimum and the fan will stop. If there is no further action within 20 seconds, it
will be of Sleep Mode and all the information will be disappeared. The fan can be reset
or changed to the low or fast level under Pause mode by pressing different keys.
4.2. When in PAUSE mode, step on the footplate to make RPM large than 40, then the
program can be reset and continue working.
5. AUDIO: support audio equipment with earphones such as MP3, CD and so on.
II. Window display of power on and startup
When power on, software version will be shown on segment text, after 1 second, elliptical
enters the Start/Ready status.
1.
Start/Ready Mode
1-1. After the software version is displayed, the Dot Matrix will display 『---』,then
『
SELECT PROGRAM OR QUICK START』will be shown on scrolling text. The
text will be different when different languages are set.
2.
Sleep Mode:
2-1. Under Start/Ready status: if no RPM is detected after 30 seconds, there are 21 LED
will be lit on Dot Matrix. If you do not pedal, the LED will be off one after one, until
all LED is off, the console enters Sleep mode.
2-2. During the exercise, if there no RPM for 20 seconds, the elliptical will enter Sleep
mode, all LED will be off automatically.