LA Fitness DK900EAJ01AA Owner's Manual - page 12
11
2012/3/8Ver1.4+Ver1.1
『
WAT』 for 1 second first, then will display the values for 10 seconds. After
that it will display 『LEVEL』
、
『
KMH』
、
『
TIME』 and 『CAL』 for 1 second
and then display the values for 10 seconds.
1-2-2. Imperial system『MLH』
:
It will display『LEVEL』
、
『
RPM』
、
『
DIST』 and
『
WAT』 for 1 second first, then it will display the values for 10 seconds.
After that it will display『LEVEL』、『MLH』、『TIME』 and『CAL』for 1
second and then display the values for 10 seconds.
1-3. When selected program is finished, the scrolling text will display:
1-3-1. Metric system『KMH』:
The scrolling text shows『EXERCISE TIME =』, then『HHMMSS= 0.00.00』
The scrolling text shows『DISTANCE COVERED =』, then『KM= 0.0』
The scrolling text shows『AVERAGE SPEED =』, then『KMH= 0.0』
The scrolling text shows『CALORIES BURNT =』, then 『KCAL= 0.0』
The scrolling text shows『AVERAGE WATTS =』, then『WATTS= 0.0』
The scrolling text shows『AVERAGE METS =』, then『METS= 0.0』
1-3-2. Imperial system『MLH』:
The scrolling text shows『EXERCISE TIME =』, then『HHMMSS= 0.00.00』
The scrolling text shows『DISTANCE COVERED =』, then『ML= 0.0』
The scrolling text shows『AVERAGE SPEED =』, then『MLH= 0.0』
The scrolling text shows『CALORIES BURNT =』, then『KCAL= 0.0』
The scrolling text shows『AVERAGE WATTS =』, then『WATTS= 0.0』
The scrolling text shows『AVERAGE METS =』, then『METS= 0.0』
2. P1 Mode: PROGRAMS mode
2-1. Under Start/Ready status, press P 1 and the Dot matrix will display『PROGRAM
1』, the scrolling text window will display『PRESS THE ARROWS TO SELECT
PROGRAM』and 『PRESS ENTER TO BEGIN PROFILE.』
2-2. You can press LEVEL▲ or LEVEL▼ to choose PROGRAM 1、PROGRAM 2 and
PROGRAM 3. After you choose the PROGRAM you want, press ENTER to
continue the weight settings.
2-3. Weight setting: scrolling text will display『ENTER WEIGHT <30-199>KG』 (or
display the string 『ENTER WEIGHT <70- 440>LBS』). You can set the value of
your weight by 0~9 number keys, the Dot Matrix will flash the preset value 30.
Meanwhile the input values will flash. You change the value by the number keys
(Range: 30 ~ 199). After setting, press ENTER and the value will be stored.
2-4. Setting time: Dot Matrix will flash the preset time of 10 min, the scrolling text will
display『ENTER TIME <10-60>MINUTES』(Range:10~60). You can select the
exercise time by the number keys 0~9, then press Enter to confirm and start the
program. Should change or revision value be necessary, you can press CLEAR.