La Spaziale S1 Mini Vivaldi Instruction Manual - page 10
INSTRUCTION MANUAL
10
LSC 014 -UK- REV. 01
APPLIANCE OPERATING TEMPERATURE ADJUSTMENT
3.1 MINI VIVALDI
1. While the appliance is operating, press and hold down the button
ON//OFF (27) for about 3 seconds.
The power control light (22) and the control light for the set temperature will flash. For example, if the
set temperature is
105°C, the control light (18) will flash.
LIGHT.
13
14
15
16
17
18
19
20
21
22
TEMP.
85
90
95
100
105
110
120
°C
2. To change the operating temperature, press and release the hot water delivery group (23); each time
the button is pressed, the temperature will be increased by
5°C (and the relevant control light will start
to flash). When the maximum temperature of
120°C is reached (control light 20), the selection function
will return to the minimum temperature of
85°C (control light 14) (cyclical operation).
3. Once the required temperature has been selected, press the button
ON/ OFF (27) to confirm the setting,
and the appliance will return to normal operation.
To set the delivery group temperature to single degrees centigrade, proceed as follows:
• Switch off the appliance by pressing the button
ON/OFF (27); the green control light (22) will go from lit
to flashing (machine on Stand-by).
• Press and hold down the two-cup button (25) for about 3 seconds; the control lights 17 and 18 will switch
on to indicate that the settings phase is in progress for intervals of
1°C.
• Each time that the steam delivery button (26) is pressed, the control lights 19, 20 and 21 will switch on
in succession and each control light indicates an increase of one degree centigrade compared to the
set temperature. Each time that the one-cup button (24) is pressed, the control lights 16, 15 and 14 will
switch on and each of these control lights indicates a decrease of one degree centigrade compared to
the set temperature. For example, if the set temperature is
105°C and the control lights 19 and 20 switch
on, the set temperature will become 105 + 2 =
107°C.
The operating temperature of the appliance is modified exclusively to improve the result in the cup according
to the type of coffee blend used.
3.2 MINI VIVALDI II
1. While the appliance is operating, press and hold down the button ON//OFF (27) for about 3 seconds.
The power control light (22) and the control light for the set temperature will flash. For example, if the
set temperature is 95°C, the control light (18) will flash.
LIGHT.
13
14
15
16
17
18
19
20
21
22
TEMP.
91
92
93
94
95
96
97
°C
2. To change the operating temperature, press and release the hot water delivery button (23); each time
the button is pressed, the temperature will be increased by
1°C (and the relevant control light will start
to flash). When the maximum temperature of
97°C is reached (control light 20), the selection function
will return to the minimum temperature of
91°C (control light 14) (cyclical operation).
3. Once the required temperature has been selected, to confirm the setting, press the button
ON/ OFF
(27), and the appliance will return to normal operation.
To set a delivery unit temperature lower than
91°C or higher than 97°C, proceed as follows:
3