La Spaziale S1 Mini Vivaldi Instruction Manual - page 15
INSTRUCTION MANUAL
LSC 014 -UK- REV. 01
15
From the
SERVICE menu, confirm the letter N, and the display will show:
with the first zero on the left flashing.
The number to be set refers to the quantity of deliveries to be entered into the machine and which will be
added to the ones left over form the previous setting operation (leftover credit).
Pressing the button
will set the first digit (from 0-9), and pressing the button
will pass on to the next
digit - the one to the right of the last digit set - which will start to flash. Proceed in the same way to set the
next digits and once the last digit on the right has been confirmed by pressing the button
OK
, the program
will pass to the next screen, where the display will show:
The letter
N will be flashing. Pressing the button
OK
, to confirm the setting will pass directly to the screen
for changing the PIN CODE to enter the programming mode; using the buttons
, to move in the
screen will cause the letter
Y to start flashing and when the button
OK
is pressed to confirm, the available
and stored doses will be cancelled and the display will return to the main screen.
From the screen for setting the
N^ CAFFE when the letter N is used to confirm, the display will show:
The letter
N will be flashing; pressing the button
OK
, to confirm the setting will quit the programming mode
and return to the main menu. Using the
and
, buttons will cause the letter
Y ito flash and when this
is confirmed by pressing the button
OK
, the display will read:
with the zero on the left flashing.
Pressing the buttons
and
will select the first digit (values from 0-9) and pressing the button
OK
will pass on to the next digit - the one to the right of the last digit set - which will start to flash. Proceed in
the same way to set the next digits and once the last digit in the PIN has been confirmed, this will quit the
programming mode, returning to the main menu screen.
N^ COFFEES
00000
RESET
N Y
NEW PIN
N Y
NEW PIN
0###