La Spaziale S1 Mini Vivaldi Instruction Manual - page 14
INSTRUCTION MANUAL
14
LSC 014 -UK- REV. 01
The letter N will be flashing; pressing the button
OK
, to confirm the setting will return to the previous display
page; moving with the buttons
, will cause the letter Y to flash; pressing the button
OK
will reset the
partial count for the delivery and return to the previous page, which will therefore be:
NOTE.
Total counts cannot be reset to zero.
4.3 PROGRAMMING
NOTE.
During the programming phase, if no button is pressed for 30 seconds, the appliance will automatically
quit this mode without storing any settings to memory.
From the main menu page, pressing and holding down the button
OK
for 3 seconds, will cause the display
to show:
with the zero on the left flashing.
Pressing the buttons
will select the first digit (from 0-9) and pressing the
OK
button will confirm
the setting and pass on to the next digit - the one to the right of the last digit set - which will start to flash.
Proceed in the same way to set the next digits and once the last digit in the PIN has been confirmed (if
correct), then you can have access to the programming mode. If the PIN is not correct, the display will
again show the first zero on the left, flashing. To quit this function without setting the PIN, wait 10 seconds
and the program will return to the main menu page.
NOTE.
The default PIN is 1234.
If the correct PIN is entered, the display will show:
The letter N will be flashing; pressing the button
OK
, to confirm the setting will pass directly to the screen
for setting the number of doses to enter into the machine; using the buttons
, to move in the screen
will cause the letter
Y to start flashing and when the button
OK
is pressed, the display will show the following
message, flashing:
WARNING
Now it is possible to dispense coffee without leftover credit or counters being updated.
To quit this menu, it is possible to wait for it to close automatically after 10 minutes or alternatively,
to return to the programming function, entering the PIN again.
.P.00000
.T.05963
PIN
0###
SERVICE
N Y
SERVICE
ON