Lucia® compact installation amplifiers rev. 3.0.0 item no. Qsg–lucia quick start guide lucia 120/2 lucia 240/2 lucia 120/2m lucia 240/2m lucia 120/1-70 lucia 240/1-70
4 important safety instructions 1. Read these instructions. 2. Keep these instructions 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s in...
5 warning to reduce risk of ire or electric shock, do not expose this apparatus to rain or moisture. Français: pour réduire les risques d’incendie ou de choc électrique, n’exposez pas l’appareil à la pluie ou à l’humidité. Do not expose this system/apparatus to dripping or splashing and ensure that ...
6 front panel (all lucia models) the front panel presents the following ampliier status indicators: 1 standby/on led indicator – a three-color led illuminates amber when ampliier is in standby power mode and illuminates green when the ampliier is on. When the ampliier enters protection mode, the led...
7 rear panel: mono high-impedance models (lucia 120/1-70 and 240/1-70) 1 balanced audio inputs (1 & 2) – connect balanced inputs using 3-pole euroblock connectors. Correct polarity (+, -) and ground terminations are shown on the rear panel. 2 unbalanced audio inputs (1 & 2) – connect unbalanced inpu...
8 set-up and operation auto standby / power-up lucia ampliiers do not have a power switch. The ampliier will turn on automatically when ac power is connected to the unit; it will go into standby mode if no signal is present at any input for 20 minutes. When in standby, the ampliier will power up in ...
