Labgear FV400 Instruction Manual - page 13
11
11
Many aspects of your STB can be set to reflect your circumstances and
preference. The System Setting menu is accessed from main menu.
A/V Setting
This menu allows the users to set TV shape, Video Output and OSD
Transparency.
1). Press the "MENU" button to enter the main menu of the STB,
2). Press the "UP" or "DOWN" cursor to select System Setting,
3). Press the "OK" button to enter the sub-menu,
4). Press the "UP" or "DOWN" button to select "A/V Setting" and Press the
"OK" button to enter its sub-menu.
TV Shape options: 4:3 / 16:9
Video Output options: RGB / CVBS
OSD Transparency range: 0~100%
RF Modulator Output frequency range:
471.25~855.25MHz(CH21-69) in PAL-I
5). Press the "UP" or "DOWN" button to select the desired item and press the
"LEFT" or " RIGHT" button to select desired setting,
6). Press the "MENU" button to return the upper menu or "EXIT" button to quit.
Note: Please make sure there is no frequency conflict between the loop
through external RF signal and internal RF modulated A/V signal.See Page 5
for detail.
System Setting