Labgear FV400 Instruction Manual - page 18
16
16
Volume Control
The volume level of the STB can be altered with the "VOL +" or "VOL -" button on
the remote control.
You can silence the sound from the receiver by pressing the "MUTE" button. The
sound remains muted until the "MUTE" button is pressed again or until the "VOL+"
or "VOL-" button is pressed, or until the receiver is turned off and on again.
Teletext
Press the "TEXT" button to Open/Close the interactive digital text.
Subtitle
Press the "SUBTITLE" button to switch the programmes subtitle to On/Off.
Displaying programme information
You can read the current programme information by pressing "INFO" button on
the remote control, then the programme information table will automatically
remove in 3~5 seconds.
TV Format
You can change the TV picture aspect by pressing "WIDE" button repeatedly on
the remote control.
When you set "TV shape" to "4:3" in the System Setting->A/V Setting menu, you
can switch the TV format to "FullFrame","Pan&Scan" or "LetterBox". But when
you set it to "16:9", you can switch to "Auto", "FullFrame", "VerticalCut" or
"PillarBox".
Pausing the current picture
You can freeze the current picture by pressing the "PAUSE" button on the remote
control. Press the button again to switch the current broadcast programme back
on to "live".
Note: the broadcast between these two pauses will be skipped.