Labgear FV400 Instruction Manual - page 14

12

12

Antenna Power

    This menu allows users to active the antenna power supply for external active  

antenna.

    1. Enter the System Setting menu, press the "UP" or "DOWN" cursor to 

highlight the  Antenna Power menu.

    2. Press the "OK" button to enter the Antenna Power menu,

    3. Press the "LEFT" or "RIGHT" cursor to to set the status to "ON" or "OFF",

    4. Press the "OK" button to save the setting and quit, press the "EXIT" button to 

quit without save the setting.

First Time Installation

    This menu allows the user to delete all existing channels in the STB, and reset 

the STB to factory default setting.

    1). Enter the System Setting menu, press the "UP" or "DOWN" button to 

highlight    the "First Time Installation".

    2). Press the "OK" button to confirm, a confirmation window appears.

    3). Press the "LEFT" or "RIGHT" cursor to highlight "Confirm" icon, press the 

"OK" button to start first time installation.

    4). Or Highlight "Exit" icon, press the "OK" button to cancel the first time 

installation.

System Info

    This menu allows users to view the software version and hardware version of 

the STB.

    1). Enter the System Setting menu, press the "UP" or "DOWN" cursor to 

highlight the System Info menu.

     2). Press the "OK" button to open up the information box. You can view the  

software version and hardware version of the STB in this box