Labomed CxL User Manual - Standard Components
Manual is about: Laboratory Microscopy
of
28
¡
After removing microscope from packaging, make sure that all of the following contents are present.
¡
The differences in configurations are the number of objectives, type of observation head, type of illumination and
purchased optional accessories.
¡
The objectives have been adjusted for a tight fit to prevent any damage during transportation. To remove an
objective, rotate it counterclockwise while gripping it with a rubber sheet, etc. to avoid any slippage.
Daylight (blue) filter
6V 20W Halogen bulb
Allen Wrench 3mm
Allen Wrench 1.2mm
Eyepiece
Spare fuses
STANDARD COMPONENTS
8
11
Power Cord
Focusable Eyepieces
Monocular/Binocular/Trinocular observation tube
Microscope Arm
Objectives
Stage
Condenser
Allen screw
R