Labomed CxL User Manual - page 23
Manual is about: Laboratory Microscopy
of
28
The condenser is most often used in the highest position. If the observed
field of view is not uniform enough, it may be improved by lowering the
condenser slightly.
Rotate the condenser height adjustment knob (1) in clockwise direction to
move the condenser to the highest position.
Slide the aperture iris diaphragm (2), so that the aperture of the objective in
use is fully illuminated.
Hold and rotate the revolving nosepiece (1) so that the objective to be
used is in line above the specimen. Always use the ribbed grip to rotate
the objective nosepiece.
6
7
Adjusting the Condenser Position and Aperture Iris Diaphragm
Switching the Objectives
Fig. 23
Fig. 24
1
20
CxL
1
2