LaCie 2big NAS User Manual - page 18
LaCie 2big NAS (OS 3.0) | LaCie 5big NAS Pro User Manual
18
Step 3: Install the Disk(s) in Disk Tray(s)
Find a suitable work area with adequate space and a flat, even surface. Make certain that all necessary
components are available:
LaCie 2big NAS disk tray
■
Hard disk
■
Disk tray screws. Use only the screws that are provided with your LaCie NAS.
■
Phillips head screwdriver. Make certain that the screwdriver is the correct size for the disk tray screws.
■
Caution: To avoid potential problems caused by electrostatic discharge (ESD), it is recommended that you
do not touch the hard disk’s printed circuit board. As a further precaution against ESD, use an anti-static
wristband or an anti-static mat to ground yourself when handling the hard disk.
To secure the disk in the disk tray:
Place the empty disk tray onto the flat work area with the handle on the bottom left.
1.