LaCie 2big NAS User Manual - page 187
LaCie 2big NAS (OS 3.0) | LaCie 5big NAS Pro User Manual
187
Disk Insertion
Carefully insert the tray into an empty hard drive bay. When the tray is most of the way in and you feel
1.
resistance, press the drive tray handle firmly until you feel the drive snap into place and the drive tray handle
is flush with the back of the LaCie NAS.
Use the disk drawer key to lock the drive.
2.
Expand your RAID array Hard Disk Capacity
SimplyRAID
LaCie SimplyRAID allows you to expand your total storage capacity by removing hard disks (one at a time) and
replacing them with larger capacity hard disks. It is not possible to replace existing hard disks with lower
capacity hard disks. Please note that data stored on the new disk will be deleted.
The instructions below pertain to storage expansion in a LaCie 5big NAS Pro chassis with available or empty
drive slots. If you are exchanging an existing hard disk in your array for a hard disk of greater capacity, please