LaCie Mobile Drive Manual - page 8
LaCie Mobile Drive
Hi-Speed USB 2.0
page
Your LaCie Mobile Hard Drive
To use your new LaCie MobileHard Drive, first in-
stall the necessary driver software and Silverlining 98.
Follow the steps below to install the necessary drivers
and software to configure your drive. Then move on to
the USB 2.0 installation steps on page 9.
Step 1: USB 2.0 Driver Installation
1. Insert the LaCie Storage Utilities CD-ROM in your
computer’s internal CD/DVD drive and open the
disc.
2. Double click the USB 2.0 Drivers Install folder.
3. Double click on the LaCie_USB_Driver_Install.
exe icon. The LaCie USB2 Storage Driver screen will
appear. Click on Next.
4. Installation will finish automatically.
Step 2: Silverlining 98 Installation
1. Re-open the LaCie Storage Utilities CD-ROM.
2. Double click the Silverlining 98 folder.
3. Double click the Silverlining98_Install.EXE icon.
4. Silverlining 98 will then initialize the install screen.
5. The “Welcome” screen will appear. Click Next.
6. The “Destination Location” screen will appear. To
alter the location where the software is installed
on your system, click the Browse button. If you do
not want to change the location, do not click on the
Browse button, and allow the software to be installed
in its default location. Click Next to continue.
7. Next is the “Start Installation” screen. Click Next.
8. The software installation will begin, and you will see
the installation screens.
9. Finally, you will see the “Silverlining 98 has been in-
stalled correctly” screen. Click Finish to complete
the installation. Now move on to page 9.
2.1. Silverlining 98 and USB 2.0 Driver Installation
ImpOrTANT INfO:
This step is necessary
ONLY for Windows 98 SE and Windows ME
users. See page 7 for installation steps necessary
for your operating system.
Storage Utilities CD-ROM Folder
Step 1
Step 2