Lagoon 440 User Manual - page 11
Navigation under motor
Before starting the engine:
- Ensure that the fuel valves are open.
- Open the valves for the engine cooling systems (see chapter
MOTORIZATION).
To start the engines, refer to the manufacturer's manual too.
z
ENGINE STARTING
Turn on the battery switches located in the port and starboard aft
cabins.
- Disengage the gear (to allow acceleration in neutral).
Proceed in the following order:
- Start the port engine first.
- Then start the starboard engine.
After starting the engine check for cooling water running out of the
exhaust and observe the color of exhaust gases.
z
BATTERY COUPLING
In the case of low engine battery power use the battery coupling
function by turning on the coupling handle located in the starboard aft
cabin.
Once the engines have been restarted make sure that the coupling
handle is turned back to its original position.
z
NAVIGATION
When using the engine, avoid making noise and waves near other
users.
Respect speed limits.
NAVIGATION
9
NAVIGATION
1
LAGOON 44O
WARNING
Never cut off the ignition or the electrical circuit
when the engine is running.