Lagoon 440 User Manual - page 65
Mast wire harness
During mast-stepping insert the cables through the base of the mast.
The connection is made at the switch box on the mast bulkhead. See
LAUNCHING chapter.
Electronics
Do not install electronic instruments or repeaters less than 1.5 m
away from the radio loudspeakers, if your boat has them.
Do not place the autopilot compass less than 0.5 m away from the
electrical harnesses.
z
ELECTRONICS PACKS (OPTIONAL EXTRAS)
Different electronics packs are offered on option.
ELECTRICITY
63
ELECTRICITY
6
LAGOON 44O
RECOMMENDATION
For your electrical requirements, we recommend
you consult a specialist or our network of
technicians.
Shore power supply
RECOMMENDATION
In order to reduce the risk of electric shock and fire:
- Before you plug in or unplug the boat/shore power
supply cable, switch off the shut off device
connected on the shore supply side.
- Connect the boat/shore supply cable in the boat
before connecting it to the shore supply socket.
- Unplug the boat/shore supply cable on shore first.
Close the shore socket cover.
- Do not modify the connections of the boat/shore
supply cable.
DANGER
Never leave the extremity of a boat/shore power
supply cable hanging in the water - it could create
an electrical field liable to injure or kill any nearby
swimmers.