Lagoon 450 User Manual - page 35
Motonautisme
Motonautisme ou voile
z
Motonautisme ou voile
Motonautisme
Motonautisme ou voile
z
Motonautisme ou voile
LAGOON 450
33
3
RIGGING / SAILS
3.2 Standing rigging
The LAGOON 450 has been adjusted by the shipyard and by the mast
manufacturer when first masting.
The cables stretch a little during the first sailings. Therefore it is
advisable to have the mast inspected and adjusted by a specialist.
Before you put out to sea, it is essential to make sure that the standing
rigging is in good condition: inspect the gooseneck, turnbuckles, and
check the condition of the shrouds.
To hoist a crew member up to the top of the mast, use the man
hoisting halyard.
Belay the crew member with a bowline on the bosun’s chair ring (do
not use snap shackle or shackle).
RECOMMENDATION
Any intervention on the standing rigging comes
within a specialist remit.
Description of the ropes
length (m)
diametre (mm)
Genoa halyard 44
12
Genoa sheet
19 x 2
14
Main halyard 67
12
Mainsail topping lift 46
12
Mainsheet 34
14
Mainsail traveller adjustment
19 x 2
10
Reef 1 (automatic)
32
14
Reef 2 (automatic )
40
14
Reef 3 (manual)
36
14
Sheet + spinnaker guy
18 x 2
12
Gennaker sheet
29
14
Spinnaker / gennaker halyard
48
12
WARNING
The man hoisting halyard which is the only one to be
authorized for this purpose, is only meant to hoist a
crew member up to the top of the mast.
RIGGING /
SAILS