Landice CX8 User Manual - page 4
4
LANDICE CX8 CROSS TRAINER
BEFORE YOU BEGIN
Before assembling or using the CX8, please read the following instructions carefully. They contain important information for use and
maintenance of the equipment as well as for your personal safety. Keep these instructions in a safe place for maintenance purposes
or for ordering spare parts.
Product-Scope: This product is made for home use and LTD (light commercial) only and tested up to a maximum body weight of
400lbs.
Product-Performance: This ergo meter is speed independent, i.e. the performance is independent from pedal frequency.
Product-Feature: The resistance can be changed by the computer.
Use-Scope: The CX8 may not be used by individual over 400lbs.
Use-Scope: This product is designed for physical exercise by adults. Please ensure that children only use it under the
supervision of an adult. The cross trainer is not recommend for use by children.
Use-Environment: Ensure that those present are aware of possible hazards, e.g. movable parts during training.
Use-Environment: Ensure that sufficient space is available to use the cross trainer.
Use-Environment: Place the cross trainer on an even, non-slippery surface.
Use-Environment: Please ensure that liquids or perspiration never enter the machine or electronics.
Use-Environment: Keep the equipment indoors, away from moisture and dust. Do not put the equipment in a garage or covered
patio, or near water.
Use-Environment: The product is made for home or LTD (light commercial) use only. Warranty and manufacturer's liability do not
extend to any product or damage to the product caused by commercial purposes.
User-Health: Consult your physician before starting any exercise programs to receive proper training advice.
User-Health: Incorrect/excessive training can lead to injuries.
User-Health: If you feel sick, chest pain, dizzy or loss of breath during your training, immediately stop the training and consult
your physician.
Product-Preparation: Ensure that training only starts after correct assembly, adjustment and inspection of the cross trainer.
Product-Preparation: Follow the steps of the assembly instructions carefully.
Product-Preparation: Only use suitable tools for assembly and ask for assistance if necessary.
Product-Preparation: Only use original LANDICE parts as delivered (see checklist).
Use-Preparation: Tighten all adjustable parts to prevent sudden movement while training.
Use-Instruction: Please follow the advice to correct training as detailed in the training instructions.
Use-Instruction: Do not use the CX8 without shoes or with loose shoes.
Use-Safety: Be aware of non-fixed or moving parts while mounting or dismounting the CX8.
Use-Safety: Use the height adjustment caps on the rear tube to ensure stable position of the CX8.
Use-Safety: Make sure the front wheels are placed in the correct position: see assembly instructions.
Product-Power-Safety: The unit requires a power supply of 100V
– 125V / 50-60Hz. It should be connected to a safety socket
with a single 10A fuse. After completing electrical connection, confirm that all the connections are secure and using intended
male/female connectors.
Product-Maintenance: If the equipment is regularly used, check all its components thoroughly every 1
– 2 month. Pay particular
attention to the tightness of bolts and nuts. This applies especially to the securing bolts for upright and handlebars.
Product-Maintenance: Incorrect repairs and structural modifications (e.g. removal or replacement of original parts) may endanger
the safety of the user.
Product-Maintenance: Damaged components may endanger your safety or reduce the lifetime of the equipment. For this reason,
worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done.
Product-Maintenance: Only use original LANDICE spare parts.
Product-Maintenance: Do not under any circumstances carry out electrical repairs or alterations yourself. Always ensure that
such work is done by a properly qualified electrician.
Product-Maintenance: Disconnect the apparatus from wall socket so there is no power to the unit before doing repair,
maintenance or cleaning.