Landice Pro Sports Owner's Manual - Self-Diagnostics
The Pro Sports Treadmill is equipped with onboard self-diagnostics. If the treadmill experiences any errors during
operation, the treadmill will display the error message. To get further information on the error you can run a self-diagnostic.
(See bottom of this page).
When you enter Self-Diagnostics you will be prompted with a warning screen (shown below). After reading it, straddle the
treadbelt by stepping on the traction strips on the sides of the running surface and press
ENTER.
The Diagnostics Tests will systematically test all of the individual components of the treadmill. During some of the tests, you
will be prompted with simple “Yes or No” questions to assist with the diagnosis. Answer the questions using the Arrow Keys
when prompted (see picture below).
Once the Self-Diagnostics has completed all of the tests, it will read one of two messages along the bottom: “No Errors
Detected”, or “Error Detected, Contact Service Provider”. Go to www.landice.com and click on Service Locator to find a
service provider in your area.
To manually enter Self-Diagnostics mode, with the treadmill off, press the
CENTER ARROWS and START at the same time.
14