Lanier 5625 Operator's Manual - 14.
8
14.
{
Interrupt
} key
Press to make interrupt copies.
⇒
P.52
“Interrupt Copying”.
15.
{
Counter
} key
Press to check the total number of copies
made.
⇒
P.58 “Counter”.
16.
Main Power indicator
This indicator lights up when the main
power switch is turned on, and goes off
when the switch is turned off.
17.
On indicator
This indicator lights up when the opera-
tion switch is turned on, and goes off
when the switch is turned off.
18.
Operation switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off).
19.
{
Clear/Stop
} key
Press to cancel the copy number entered.
While copying, press to stop copying.
This key is also used to clear data.
20.
{
Start
} key
Press to start copying. Use to set the Auto
Start.
21.
{
#
} key
Use to enter data in selected modes.
22.
Number keys
Use to enter the desired number of cop-
ies. They are also used to enter data.
23.
12 keys (Color Mode keys)
Press to select the color mode.
⇒
P.29
“Selecting a Color Mode”.
24.
{
Original
} key
Press to specify the type of original im-
age.
⇒
P.35 “Selecting the Original Image
Type (Photo/Text)”.
25.
<> keys (Cursor keys)
Press to select an item on the panel dis-
play.
26.
{
Auto Image Density
} key
Press to make copies in Auto Image Den-
sity mode.
⇒
P.28 “Auto image density”.
27.
{
Darker
} key
Press to increase the image density.
28.
{
Lighter
} key
Press to lower the image density.
29.
{
Auto Reduce/Enlarge
} key
Enlarges or reduces the image automati-
cally according to the specified paper
size.
⇒
P.50 “Auto Reduce/Enlarge”.
30.
{
Zoom
} key
Enlarges or reduces in 1 % steps.
⇒
P.61
“Zoom”.
31.
{
Image Adjustment
} key
Press to change the default settings for
image adjustment.
⇒
P.98 “Image Adjust-
ment”.
32.
{
Bypass Feed
} key
Press to select the paper type when copy-
ing with the bypass tray.
⇒
P.41 “Copying
from the Bypass Tray”.