Lanier 5625 Operator's Manual - Auto Reduce/enlarge

Copying

50

2

B

Select 

[Duplex]

, or 

[Duplex Thick]

 with the <> keys.

Note

❒ To copy onto non-standard size paper, press the 

[Custom]

 key and select or

enter the size. For details, 

⇒

 P.44 “Copying onto non-standard size paper with

the bypass tray”.

C

Press the 

[OK]

 key.

D

Adjust the paper guides to the paper size.

Note

❒ Make sure that the paper guides match the paper size. If the paper guides

are not adjusted to the paper size properly, paper might be skewed or pa-

per misfeeds might occur.

E

Insert the paper into the bypass tray.

Note

❒ Make sure that front side (the side that has been copied onto) faces down.

F

Set your originals, then press the {

Start

} key.

Auto Reduce/Enlarge

The machine can select the proper reproduction ratio based on the selected pa-

per size and the original size.