Lanier 5625 Operator's Manual - Document Feeder

Setting one Original at a Time in the Document Feeder

21

1

Setting one Original at a Time in the 

Document Feeder

If you set one original at a time in the document feeder, the second and subse-

quent originals can be fed and copied automatically without pressing the {

Start

}

key.

Note

❒ Do not press down or hold originals after inserting them.

❒ While originals are fed from the original table to the exposure glass, do not

pull them out.

❒ Do not lift the document feeder until the original has been completely fed out.

A

Correct any curl, fold, or crease in the originals before setting them.

B

Make sure the Insert Original indicator is lit and the exposure glass is clear

of originals.

C

Adjust the guide to the original size.

D

Set the original face up into the document feeder until the Insert Original

indicator goes off.

Note

❒ If you are copying a stack of originals one sheet at a time and you want to

keep them in order, start with the last page of the originals.

❒ The original guide must touch the front side of the original.

E

Press the {

Start

} key.