Lanier 5625 Operator's Manual - Panel Display
9
Panel Display
The panel display shows the status of the machine, error messages, and function
menus.
Important
❒ Do not apply a strong shock or force of about 30N (about 3kgf) or more to the
panel display or you could damage it.
Note
❒ Currently selected items are shown highlighted on the panel display
(e.g.
).
❒ Keys that are not available are shown grayed out (e.g.
).
Layout and Keys
❖
Initial display
1.
The machine status and messages
appear here.
2.
Items which can be selected or
specified.
3.
These four keys correspond to the
keys that are in the bottom line of
the display (e.g.
[Ratio]
,
[100%]
, and
[Paper]
in the above display). Press
the relevant key to select a key in the
display.
4.
Number of copies set.
5.
Settings for this function.
6.
Press these keys to select an item
on the display.
To move the selection to the left, press the
< key.
To move the selection to the right, press
the > key.
Auto
OK