Larsen & Brusgaard VISO User Manual - Logbook
After landing the jump data can be displayed on the LCD by accessing the
Logbook
Area and Profile Area.
Logbook Area
Explanation: The logbook can store up to 200 jumps, and be reset at any time. It is
not possible to delete a single jump.
Perform ACCESS on to enter the
Logbook Area (Performing ACCESS,
see page
20)
In the
Logbook Area press to display,
Jump Data
Max. speed under canopy
Padlock window
Display when logbook is empty
Jump number
Exit altitude
Deployment altitude
Freefall time
Max. speed in freefall
Shortly after takeoff the VISO switches to Jump Mode and displays the altitude in
the Altitude/Speed area.
- When the VISO is set to Alti-Meter, the ALTI and Feet/Meter icons are ON and
it will display the altitude during climb, during the freefall and under canopy.
- When the VISO is set to Speed-Meter, the ALTI, SPEED, Feet/Meter, Mph/Kmh
and TAS/SAS icons are ON.
Note: When set to Speed-Meter, the VISO will display the altitude during climb and
switch to Speed-Meter during the freefall and under canopy.