Larsen & Brusgaard VISO User Manual - Battery Status
Full capacity: Symbol shows two black bars inside the battery icon.
Half capacity: Symbol shows one black bar inside the battery icon.
Low capacity: Symbol shows no black bars, just an “empty” battery icon.
Batteries should be replaced as soon as possible.
The “
Low bat” flashes once every 15 sec.
Caution: Do not make night jumps at sub zero temperatures when bat.
shows low capacity.
Empty batteries: The battery icon flashes. Replace batteries immediately.
Battery Status
Carefully slide out battery holder and remove batter-
ies. Install new batteries using the correct polarity.
Use only CR-2325.
After battery replacement or resetting, the battery
system requires 2 minutes to calibrate itself before
showing the correct status.
While calibrating, the battery icon toggles between
full and low.
Battery Replacement
Note: Customer settings are not lost when removing batteries. However, the built-in
clock may need to be reset to the current time.