Lavry DA2002 Operation Manual - page 6
6
SPDIF (consumer format) input to
IEC INPUT
.
AES/EBU input to the XLR connector designated as
AES INPUT 2
AES/EBU input to the XLR connector designated as
AES INPUT 1
The unit can be connected to one, two or three digital input connectors located on the rear panel:
Input signal connection
the input search mode, or visa versa. The mode selected is retained when power is removed.
Holding the
INPUT SELECT
button for more than one second switches between manual input selection and
will step through the inputs but will skip the inactive input connectors (where no signal is present).
Holding the
INPUT SELECT
button for more then a second makes the
DA2002
go into search mode: the unit
button moves to the next input position.
The
INPUT SELECT
lamp indicators show the selected input signal. Pressing the
INPUT SELECT
push
Input signal selection
INPUT SELECT:
Controls selection of digital inputs to the DAC.
POLARITY:
Inverts the absolute polarity of the signal.
located on the front panel.
Operation of the
Model DA2002 Digital to Analog Converter
requires the use of two push button switches
PART I: Operating Instructions
DA2002
Operations Manual