Leckey LS240-04 User Instructions - page 17
8.10 Angle Adjustable
Thoracic Laterals
To adjust the angle of the laterals, loosen
the screws (A) at the hinges. Contour the
laterals to the required angle. Retighten the
screws. The laterals have a small degree
of depth and rotational adjustment for
more proximal positioning. Loosen
screws (B) adjust the pad and retighten
the screws securely.
B
A
B
8.11 Shoulder Support
The shoulder support can be adjusted
in a number of ways – height, depth
and angle.
To adjust the height or the depth, remove
the spine upholstery shroud, loosen the two
screws (A) on either side of the mounting
bracket. Move the shoulder support to the
required position. Retighten the screws and
replace the spine upholstery shroud.
If further height adjustment is required,
please refer to the section on Backrest
Height. The Size 2 shoulder support can
also be attached to the Size 1 seat to further
increase the backrest height.
To adjust the angle of the whole shoulder
support, loosen both the screws (B) on the
ball and socket joint. Position the support at
the required angle. Retighten the screws.
B
B
A
To adjust the angle of the wings of the
shoulder support, loosen both the screws (C)
at the hinges. Contour the shoulder support
to the required shape. Retighten the screws.
C