Leckey LS240-04 User Instructions - page 7
To fit the contoured sacral support cushion,
loosen the laterals using the screw (A) on
the hinge. Insert laterals into pockets and
fasten poppers on back.
Slide the support onto the lowest mounting
bracket on the backrest spine. Secure it
with a bolt (B) on either side. Cover the
bracket with a spine upholstery shroud (C).
7.7 Contoured sacral
support
A
B
C
7.8 Thoracic Support
Fit the cushion over the hardware and fasten
at the back with the poppers.
Slide the support onto the middle mounting
bracket on the backrest spine. Secure it with
a bolt (A) on either side. Cover the bracket
with a spine upholstery shroud (B).
A
B
Fit the sacral cushion over the hardware
and fasten at the back with the poppers.
The standard sacral support should
be attached with the double flaps (A)
at the top.
To attach the sacral support, slide the
support onto the lowest mounting bracket
on the backrest spine. Secure it with a bolt
(B) on either side. Cover the bracket with a
spine upholstery shroud (C).
7.5 Sacral support
B
A
A
C
To attach the hip laterals to the standard
sacral support, loosen the screw (A) and
insert the bar of the hip lateral into the hole
on the side of the sacral support. Tighten
the screw to secure.
To attach the hip lateral covers, slide the
cover over the lateral support.
7.6 Hip Laterals