Leckey LS240-04 User Instructions - page 18
8.12 Headrest
8.13 Seat Base Depth
To adjust the height of the headrest, loosen
the screw (A) at the top of the backrest
spine. Position the headrest to the required
height to suit the user’s head position.
Retighten the screw.
To position the headrest, loosen one or both
of the plastic handles (B) at the hinges of the
headrest mounting. Position the headrest as
required. Retighten the screws.
To angle or rotate the head support, loosen
screws (C), set to required position and
retighten securely.
To adjust the seat base depth, loosen the
nuts (A) underneath the upper leg supports
with a spanner. Move the upper leg support
in or out to the required position and
retighten the nuts securely. It is possible to
upgrade the Size 1 seat base to achieve the
same seat depth size as the Size 2 seat.
To change the profile of the Profiling
Contoured Headrest, remove the cover,
loosen the screws (D), set to the required
position and retighten screws. Fit the
cover again.
To adjust the position of the Lateral
Headrest loosen screw (E), position as
required and retighten the screw.
A
A
B
C
A
8.14 Seat base – Upper Leg
Support Angle for Windsweep
-ing, Abduction or Adduction
To adjust the upper leg support angle
loosen the nuts (A) underneath the upper leg
supports, adjust to the required angle and
then retighten the nuts securely.
A
A
D
E