Ledj q batten user manual order code: ledj300 table of contents 1. Safety instructions 2. Technical specifications 3. How to set the unit 4. Dmx 512 address setting 5. How to control the unit 6. Troubleshooting 7. Fixture cleaning.
1. Safety instructions warning please keep this user guide for future consultation. If you sell the unit to another user be sure that they also receive this. Unpack and check carefully that there is no transportation damage before using the unit. Before operating, ensure that the voltage and frequen...
L light source: 5 pcs x 5w quad-colour (rgba) leds l dimensions: 580 x 100 x 133mm l weight:1.82kg l power socket: iec in/out l xlr sockets: 3-pin xlr in/out 3. How to set the unit 3.1 control panel 1- iec power input, 2- fuse, 3- dmx input, 4- menu & display 5- dmx output, 6- remote control, 7- iec...
Fade mode press the menu button to select press the enter button and the display will blink. Use the down and up buttons to select the (fa00-99) or (ff00-99) mode. Once the mode has been selected, press the enter button to confirm. Auto mode press the menu button to select . Press the enter button a...
4 channel mode channel value function 1ch 0-255 red 0-100% 2ch 0-255 green 0-100% 3ch 0-255 blue 0-100% 4ch 0-255 amber 0-100% 7 channel mode channel value function 1ch 0-255 master dimmer 2ch 0-255 strobe 3ch 0-255 red(0-100%) 4ch 0-255 green(0-100%) 5ch 0-255 blue(0-100%) 6ch 0-255 amber(0-100%) 7...
The “r”, “g”, “b” and “w” buttons are used to set the brightness for the red, green, blue and white/amber/uv leds, to change the brightness use the “+” and “-” buttons. Note: see over leaf for dmx address set up examples. Dmx address examples: to set the dmx address “245”; 1) press the “s” button, t...
