Ledj Q Batten LEDJ300 User Manual - page 3
l
Light source: 5 pcs x 5W Quad-colour (RGBA) LEDs
l
Dimensions: 580 x 100 x 133mm
l
Weight:1.82KG
l
Power socket: IEC IN/OUT
l
XLR sockets: 3-pin XLR IN/OUT
3. How to set the Unit
3.1 Control Panel
1- IEC Power input, 2- Fuse, 3- DMX Input, 4- Menu & Display
5- DMX Output, 6- Remote Control, 7- IEC Output
Buttons function of display
MENU
Selects the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
Confirms the selected functions
Led display menu
Colour mode
CoLo
Cr 00~99(Red)
CG 00~99(Green)
Cb 00~99(Blue)
CU 00~99(Amber)
CF 00~99 (Colour flash speed)
Colour Mixing mode
Cn01
Cn 00~015
Jump mode
Junp
JU 00~99
JF 00~99
(Flash speed)
Fade mode
Fade
FA 00~99
FF 00~99
(Flash speed)
AUTO
aUTO
Slave mode
SLAV
Sound
SU00
SU 00~99 Sensitivity
Channel Mode
2CH/3CH/4CH/7CH
2/3 channel mode
4/7 channel mode
DMX Address
A001
A001 – A512
3.2 Main Functions
To select any of the given functions, press the MENU button up to where the
required function is showing on the display. Select the function bypressing the
ENTER button and the display will blink. Use the DOWN and UP buttons to
change the mode. Once the required mode has been selected, press the
ENTER button to confirm.
Colour Mode
Press the MENU button to select
Press the ENTER button and the
display will blink. Use the DOWN and UP buttons to select the
(Cr00-99) or
(CG00-99) or
(Cb00-99) or
(CU00-99) or
(CF 00-99) mode. Once the mode has been selected, press the ENTER
button to confirm.
Colour mixing Mode
Press the MENU button to select
. Press the ENTER button and the
display will blink. Use the DOWN and UP buttons to choose the
(Cn00-15) mode. Once the mode has been selected, press the ENTER button
to confirm.
Jump Mode
Press the MENU button to select
Press the ENTER button and the
display will blink. Use the DOWN and UP buttons to select the
(JU00-99) or
(JF00-99) mode. Once the mode has been selected,
press the ENTER button to confirm.